Links to operate and release distances of reed sensors in the three standard AT bands when actuated with NdFeB standard magnets is given below. Although some of the AT band / magnet combinations will produce similar actuating distances, selecting the right AT band and magnet for an application is important and can be done by going through our AT band FAQ and our magnet selection guide. Please contact us for more information.
|
|
|
Operate and release distances for the R3-S SMD reed sensor in the three standard AT bands when actuated as shown in the sketch with the...
|
|
|
|
|
Operate and release distances for the R2-S SMD reed sensor in the three standard AT bands when actuated as shown in the sketch with the...
|
|
|
|
|
Operate and release distances for the R2B-S normally closed (NC) SMD reed sensor in the two standard AT bands when actuated as shown in the sketch with the...
|
|
|
|
|
Operate and release distances for the R2E-S bistable (latching) SMD reed sensor in the standard AT bands when actuated as shown in the sketch with the...
|
|
|
|
|
Operate and release distances for the MK-xxxx PCB mountable reed sensor with integrated resistor, in the two standard AT bands when actuated (as shown in the sketch) with the...
|
|
|
|
|
Operate and release distances for the MS-104 PCB mountable reed sensor in the three standard AT bands when actuated (as shown in the sketch) with the...
|
|
|
|
|
Operate and release distances for the MS-105 PCB mountable reed sensor in the three standard AT bands when actuated (as shown in the sketch) with the...
|
|
|
|
|
Operate and release distances for the MS-106 PCB mountable reed sensor in the three standard AT bands when actuated (as shown in the sketch) with the...
|
|
|
|
|
Operate and release distances for the MS-107 PCB mountable reed sensor in the three standard AT bands when actuated (as shown in the sketch) with the...
|
|
|
|
|
Operate and release distances for the MS-108 PCB mountable reed sensor in the three standard AT bands when actuated (as shown in the sketch) with the...
|
|
