SMD and PCB Mountable Reed Sensors

We manufacture a range of SMD, and PCB mountable reed sensors in normally-open, normally closed, and latching forms. The SMD versions are supplied in tapes conforming to IEC 60286-3 standards, for automatic pick and place, and can be used in assemblies where all the components are SMD. For environmental reasons, the leads are plated with pure Tin, which is Lead free.

PCB mountable reed sensors, which are omni-polar, come in a range of sizes and mounting pitches, capable of switching the lowest of 1W loads, up to 30 W. In addition, molded PCB mountable reed sensors with an integrated resistor are available. The integrated resistor can be used for level sensing applications, contact protection, or custom diagnostics. This whole section is available as one PDF file here. The SGS certificate for RoHS compliant levels of Hexavalent Chromium, Cadmium, Mercury and Lead in these reed sensors is available here.

		R5 Ultra-miniature SMD Reed Sensors Omni polar, normally open (NO), 9.5 mm SMD pitch. 5W switching capability at 0.35 A current, internal blades are oriented to top surface of sensor. Tape and reel packed.
		R3 Miniature SMD Reed Sensors Omni polar, normally open (NO), 16.25 mm SMD and low-profile SMD pitch. 10 W switching capability at 0.5 A current, internal blades are oriented to top surface of sensor.
		R2 Standard size SMD Reed Sensors Omni polar, normally open (NO), 19.5 mm SMD and low-profile SMD pitch, 10 W switching capability at 0.5 A switching and 1.5 A carry, internal blades are oriented to top surface of sensor.
		MK Reed sensor with integrated resistor Omni polar, normally open (NO), molded with internal blades perpendicular to dot marked surface, integrated 0.125 W resistor with a range of values. Suitable for level sensing.
		R2B Normally Closed SMD Reed Sensors Polarity sensitive, normally closed (NC), 19.5 mm SMD and low-profile SMD pitch. 10W switching capability at 0.5 A, internal blades are oriented to top surface of sensor.
		R2E Latching / Bi-stable SMD Reed Sensors Polarity sensitive, "remembers" last actuated state, 19.5 mm SMD and low-profile SMD pitch, capable of switching 10 W at 0.5 A, internal blades oriented to top surface of sensor.
		MS-10x Miniature PCB Mountable Reed Sensors Omni polar, normally open (NO), epoxy encapsulated, PCB mountable sensors in 10.6 mm, 12.7 mm, and 15.2 mm pitch, capable of switching up to 10W, internal blades oriented to top surface of sensor.
		MS-10x Standard Size PCB Mountable Reed Sensors Omni polar, normally open (NO), epoxy encapsulated, PCB mountable sensors in 17.7 mm, and 20.3 mm pitch, capable of switching up to 30W, internal blades oriented to top surface of sensor, change over versions available on request.
		Actuation Distances for all Reed Sensors Selecting the right AT band and magnet for an application is best done by going through our AT band FAQ and our magnet selection guide. Operate and release distances for all standard reed sensors in...

Ultra Miniature Miniature Standard NC Latching Miniature SIP Standard SIP Level Sensor Distances Crosslink Notes

Reed Relays and Electronics India Limited, 2008

Clicky