Miniature Standard Formations Test Coils Magnets Production Crosslink PC Cards Notes

Magnets
Test Coils
Lead Free

Protection
Formations
AT Band FAQ

Usage Notes

Reed Glossary

IL-2022 Reed Switch for Inductive Loads

Release AT configurable from 40% to 90% of operate AT

Glass sealed on round portion of wire for maximum seal strength

Flattened leads oriented to contact

RoHS Compliant and Lead-free

20-50 operate AT band

This reed switch is designed for performance at moderate inductive loads of 15W. The flattened lead outs are especially useful for orienting the internal blades to face one way while soldering, welding etc, for maximum in-group sensitivity. The two differential AT bands which are available cover a wide range of release AT specific applications. This reed switch is completely Lead-free and conforms to the RoHS directive.

Drawing of IL-2022 Reed Switch for Inductive Loads

All dimensions in mm

Not to be cropped or formed, less than 2.0 mm from the seals

Download this data sheet

Lead Formations

IL-2022 reed switches can be supplied in the standard formations shown below. Do contact us for any other special formations or non-standard bending /forming pitches. More information on these formations and tolerances for the dimensions given below can be found here.

Applications

This reed switch is suitable for use in the following applications and in many others: coffee machines, water tank control, digital wind vanes, rowing electronics, electronics and science kits...

Electrical

Sub Code		L	M	H
Operate Range	AT	20 - 50	20 - 50	20 - 50
Release Range	AT	8 - 25	11 - 30	14 - 50
Contact Rating (max)	W / VA	15.0	15.0	15.0
Switching Current (max)	A	0.5	0.5	0.5
Carry Current (max)	A	1.75	1.75	1.75
DC Switching Voltage (max)	V DC	150	150	150
AC Switching Voltage (max)	V AC	125	125	125
Breakdown Voltage (min)	V DC	200	200	200
Initial Contact Resistance (max)	mΩ	100	150	200
Insulation Resistance (min)	Ω	10¹¹	10¹¹	10¹¹
Capacitance (min)	Pf	0.2	0.2	0.2

Miscellaneous

Operate Time (max)	ms	1.0
Bounce Time (max)	ms	0.5
Release Time (max)	ms	0.15
Resonance Frequency	Hz	> 2000
Operating Frequency (max)	Hz	500
Operating Temperature	°C	-40 to +200
Shock Resistance (½Sin wave for 11ms)	g	50
Vibration Resistance (10-2000Hz)	g	20
Measurement Test Coil		717 102 002