Reed Relays and
Electronics India Limited
Manufacturer of Reed Switches, Reed Sensors and Reed-based products
Reed Relays and Electronics India Limited Incorporated in 1971

Actuation Distances for MS-216-L Cylindrical Sensors

Operate and release distances for the MS-216 Large cylindrical sensor in the three standard AT bands when actuated (as shown in the sketches) with NdFeB standard magnets is shown below. All distances given are in mm with tolerances of ±0.5mm. Although some of the AT band / magnet combinations will produce similar actuating distances, selecting the right AT band and magnet for an application is important and can be done by going through our AT band FAQ and magnet selection guide.

Tip to tip Actuation distances

MS-216-L actuation-magnet tip to sensor tip
Magnet actuation direction

Operate Band 20-25 (AT)

MagnetDimensionsOperate DistanceRelease Distance
NDR-T4.0 x 1.5 x 1.5N/AN/A
NDR-S6.0 x 2.5 x 2.5N/AN/A
NDR-M8.0 x 3.0 x 3.01.0 – 3.07.0 – 8.0
NDR-I12.0 x 3.5 x 3.55.0 – 7.011.0 – 13.0
NDR-L19.0 x 4.0 x 4.09.0 – 11.017.0 – 19.0
NDC-TØ2.0 x 4.0N/AN/A
NDC-SØ3.0 x 7.0N/AN/A
NDC-MØ4.0 x 10.04.0 – 6.010.0 – 11.0
NDC-IØ6.0 x 12.012.0 – 14.019.0 – 22.0
NDC-LØ8.0 x 15.020.0 – 23.030.0 – 33.0

Operate Band 25-30 (AT)

MagnetDimensionsOperate DistanceRelease Distance
NDR-T4.0 x 1.5 x 1.5N/AN/A
NDR-S6.0 x 2.5 x 2.5N/AN/A
NDR-M8.0 x 3.0 x 3.0N/AN/A
NDR-I12.0 x 3.5 x 3.53.0 – 5.08.0 – 11.5
NDR-L19.0 x 4.0 x 4.06.0 – 9.012.0 – 17.0
NDC-TØ2.0 x 4.0N/AN/A
NDC-SØ3.0 x 7.0N/AN/A
NDC-MØ4.0 x 10.02.0 – 4.07.0 – 10.0
NDC-IØ6.0 x 12.010.0 – 12.015.0 – 19.0
NDC-LØ8.0 x 15.017.0 – 20.024.0 – 30.0

Operate Band 30-35 (AT)

MagnetDimensionsOperate DistanceRelease Distance
NDR-T4.0 x 1.5 x 1.5N/AN/A
NDR-S6.0 x 2.5 x 2.53.0 – 4.04.5 – 5.0
NDR-M8.0 x 3.0 x 3.06.0- 7.09.0 – 10.0
NDR-I12.0 x 3.5 x 3.59.0 – 12.012.0 – 15.0
NDR-L19.0 x 4.0 x 4.014.0 – 16.017.5 – 20.0
NDC-TØ2.0 x 4.0N/AN/A
NDC-SØ3.0 x 7.05.0 – 6.07.0 – 8.0
NDC-MØ4.0 x 10.010.0 – 11.013.0 – 14.0
NDC-IØ6.0 x 12.016.0 – 17.020.0 – 21.0
NDC-LØ8.0 x 15.020.0 – 23.024.0 – 28.0

Parallel Actuation Distances

Magnet actuation direction

Operate Band 20-25 (AT)

MagnetDimensionsOperate DistanceRelease Distance
NDR-T4.0 x 1.5 x 1.5N/AN/A
NDR-S6.0 x 2.5 x 2.54.0 – 5.06.0 – 7.0
NDR-M8.0 x 3.0 x 3.08.0 – 9.012.0 – 13.0
NDR-I12.0 x 3.5 x 3.511.0 – 12.016.0 – 18.0
NDR-L19.0 x 4.0 x 4.017.0 – 18.023.0 – 24.0
NDC-TØ2.0 x 4.0N/AN/A
NDC-SØ3.0 x 7.05.0 – 6.08.0 – 9.0
NDC-MØ4.0 x 10.010.0 – 12.015.0 – 17.0
NDC-IØ6.0 x 12.019.0 – 20.026.0 – 27.0
NDC-LØ8.0 x 15.024.0 – 28.034.0 – 37.0

Operate Band 25-30 (AT)

MagnetDimensionsOperate DistanceRelease Distance
NDR-T4.0 x 1.5 x 1.5N/AN/A
NDR-S6.0 x 2.5 x 2.53.0 – 4.04.0 – 7.0
NDR-M8.0 x 3.0 x 3.06.0 – 8.09.5 – 13.0
NDR-I12.0 x 3.5 x 3.511.0 – 12.015.0 – 17.0
NDR-L19.0 x 4.0 x 4.014.0 – 16.019.0 – 23.0
NDC-TØ2.0 x 4.0N/AN/A
NDC-SØ3.0 x 7.05.0 – 6.08.0 – 9.0
NDC-MØ4.0 x 10.010.0 – 11.514.0 – 17.0
NDC-IØ6.0 x 12.016.0 – 20.021.0 – 27.0
NDC-LØ8.0 x 15.022.0 – 25.028.0 – 34.0

Operate Band 30-35 (AT)

MagnetDimensionsOperate DistanceRelease Distance
NDR-T4.0 x 1.5 x 1.5N/AN/A
NDR-S6.0 x 2.5 x 2.53.0 – 4.04.5 – 5.0
NDR-M8.0 x 3.0 x 3.06.0- 7.09.0 – 10.0
NDR-I12.0 x 3.5 x 3.59.0 – 12.012.0 – 15.0
NDR-L19.0 x 4.0 x 4.014.0 – 16.017.5 – 20.0
NDC-TØ2.0 x 4.0N/AN/A
NDC-SØ3.0 x 7.05.0 – 6.07.0 – 8.0
NDC-MØ4.0 x 10.010.0 – 11.013.0 – 14.0
NDC-IØ6.0 x 12.016.0 – 17.020.0 – 21.0
NDC-LØ8.0 x 15.020.0 – 23.024.0 – 28.0

Ampere Turn Selection
Reed Sensor Manufacturer Cross Reference For any application, it is important to select the correct Ampere Turn (AT) or magnetic sensitivity of a Reed Switch, Reed Sensor or Continue reading ->

Aug 27, 2020

Magnet Usage
Magnet storage Rectangular Magnets The storage and usage temperature of magnets should be within the individual raw material specification limits. It Continue reading ->

Sep 4, 2019

Operating Characteristics of a Reed Switch
Magnetic characteristics of a reed switch The following examples show typical operating characteristics of a reed switch when actuated with a magnet from various axes. Generally, Continue reading ->

Sep 4, 2019

Magnet Information
Magnet Information In general, there are four families of magnets available commercially. Factors such as operating temperature, demagnetizing effects, Continue reading ->

Nov 4, 2020