We manufacture a range of SMD, and SIP Reed Sensors in Normally Open, Normally Closed, and Latching forms. The SMD versions are supplied in tapes conforming to IEC 60286-3 standards, for automatic pick and place, and can be used in assemblies where all the components are SMD. For environmental reasons, the leads are plated with pure Tin, which is Lead-free. PCB Mountable Reed Sensors, which are Omni-polar, come in a range of sizes and mounting pitches, capable of switching the lowest of 1W loads, up to 30 W.
In addition, molded PCB mountable reed sensors with an integrated resistor are available. The integrated resistor can be used for building Level Sensors, for Contact Protection, or for any custom applications.
 | Normally Open type SMD reed sensors are Omni-polar devices that actuate with either pole of magnet. These sensors are supplied in tapes conforming to IEC 60286-3 standards, for automatic pick and place. For environmental reasons, the leads are plated...Continue reading |
 | These types of sensors use magnetic biasing to convert a Normally Open sensor to a Normally Closed or a Bistable type. Biased sensors are polarity sensitive, capable of switching 10 W at 0.5 A, and can be actuated with a magnet having opposite polari...Continue reading |
 |
These SIP devices are Normally Open, mountable on PCBs having a through hole and are Omni-polar. We manufacture these in a range of sizes and mounting pitches, capable of switching the lowest of 1W loads, up to 30 W. For environmental reasons, the le...Continue reading |
 | Links to operate and release distances of reed sensors in the three standard AT bands when actuated with NdFeB standard magnets are listed below. Although some of the AT band / magnet combinations will pro...Continue reading |
 | Nearest reed sensor equivalents to those of other manufacturers like Hamlin Electronics, OKI Sensor Device Corporation, Aleph International, Meder Electronic, and Coto Technology is... Continue reading |
