Reed Relays and
Electronics India Limited
Manufacturer of Reed Switches, Reed Sensors and Reed-based products
Reed Relays and Electronics India Limited Incorporated in 1971

Actuation Distances for R2E Latching Reed Sensors

Operate and release distances for the R2E Latching type reed sensor in the two standard AT bands when actuated with NdFeB standard magnets are listed below. All distances given are in mm, with tolerances of ±0.5mm. Although some of the AT band / magnet combinations will produce similar actuating distances, selecting the right AT band and magnet for an application is important and can be done by going through our AT band FAQ and our magnet selection guide.

Actuation Distances for R2E-S Gull-wing SMD

R5B Magnet Actuation
Magnet Actuation Direction

Release Band 10-15 (AT)

MagnetDimensionsLatch/Un-Latch Distance
NDR-T4.0 x 1.5 x 1.54.0 – 7.0
NDR-S6.0 x 2.5 x 2.59.0 – 15.0
NDR-M8.0 x 3.0 x 3.014.0 – 21.0
NDR-I12.0 x 3.5 x 3.5
NDR-L19.0 x 4.0 x 4.028.0 – 37.0
NDC-TØ2.0 x 4.04.0 – 8.0
NDC-SØ3.0 x 7.013.0 – 19.0
NDC-MØ4.0 x 10.019.0 – 26.0
NDC-IØ6.0 x 12.0
NDC-LØ8.0 x 15.038.0 – 48.0

Ampere Turn Selection

Reed Sensor Manufacturer Cross Reference For any application, it is important to select the correct Ampere Turn (AT) or...Continue reading ->

Magnet Usage

Magnet storage The storage and usage temperature of magnets should be within the individual raw material...Continue reading ->

Operating Characteristics of a Reed Switch

Magnetic characteristics of a reed switch When a Reed Switch is actuated by a permanent magnet, the ON-OFF region differs...Continue reading ->

Magnet Information

Magnet Information In general, there are four families of magnets available commercially. Factors such as operating...Continue reading ->