Reed Relays and
Electronics India Limited
Manufacturer of Reed Switches, Reed Sensors and Reed-based products
Reed Relays and Electronics India Limited Incorporated in 1971
×

Reed Switches

PCB Mountable Reed Sensors

These SIP devices are Normally Open, mountable on PCBs having a through hole and are Omni-polar. We manufacture these in a range of sizes and mounting pitches, capable of switching the lowest of 1W loads, up to 30 W. For environmental reasons, the leads are plated with pure Tin, which is Lead-free.

 

MS-104 Ultra Miniature PCB Mountable Reed Sensor

MS-104 Ultra Miniature PCB Mountable Reed Sensor

Omni polar, normally open (NO), epoxy encapsulated, 10.1 mm PCB mountable pin pitch, capable of switching up to 10W, internal blades oriented to top surface of sensor. Continue reading

Activation Distances for MS-104 Reed Sensors

Activation Distances for MS-104 Reed Sensors

Operate and release distances for the MS-104 reed sensor in the three standard AT bands when actuated with NdFeB standard magnetsContinue reading

 

MS-105 Miniature PCB Mountable Reed Sensor

MS-105 Miniature PCB Mountable Reed Sensor

Omni polar, normally open (NO), epoxy encapsulated, 12.7 mm PCB mountable pin pitch, capable of switching up to 10W, internal blades oriented to top surface of sensor. Continue reading

Activation Distances for MS-105 Reed Sensors

Activation Distances for MS-105 Reed Sensors

Operate and release distances for the MS-105 reed sensor in the three standard AT bands when actuated with NdFeB standard magnets… Continue reading

 

MS-106 Reduced Miniature PCB Mountable Reed Sensor

MS-106 Reduced Miniature PCB Mountable Reed Sensor

Omni polar, normally open (NO), epoxy encapsulated, 15.2 mm PCB mountable pin pitch, capable of switching up to 10W, internal blades oriented to top surface of sensor. Continue reading

Activation Distances for MS-106 Reed Sensors

Activation Distances for MS-106 Reed Sensors

Operate and release distances for the MS-106 reed sensor in the three standard AT bands when actuated with NdFeB standard magnets… Continue reading

 

MS-108 Standard Size PCB Mountable Reed Sensor

MS-108 Standard Size PCB Mountable Reed Sensor

Omni polar, normally open (NO), epoxy encapsulated, 17.7 mm PCB mountable pin pitch, capable of switching up to 30W, internal blades oriented to top surface of sensor. Continue reading

Activation Distances for MS-108 Reed Sensors

Activation Distances for MS-108 Reed Sensors

Operate and release distances for the MS-108 reed sensor in the three standard AT bands when actuated with NdFeB standard magnets… Continue reading

 

IR-xxxx Reed Sensor with Integrated Resistor

IR-xxxx Reed Sensor with Integrated Resistor

Omni polar, normally open (NO), molded with internal blades perpendicular to dot marked surface, integrated 0.125 W resistor with a range of values. Suitable for level sensing. Continue reading

Activation Distances for IR-xxxx Reed Sensors

Activation Distances for IR-xxxx Reed Sensors

Operate and release distances for the IR-xxxx reed sensor in the two standard AT bands when actuated with NdFeB standard magnets… Continue reading