MO-1422 Miniature Off-center Reed Switch
Description
This off centre contact Form A reed switch is designed for highly sensitive magnet applications. Measurements are always taken with the contact overlap portion centered to the length of the test coil, with the width of all blades in a batch of switches, facing one way, for better in-group measurement accuracy. The cropped version is suitable for smaller plastic housings and can be soldered to cables, the SMD version is suitable for reflow on PCBs, and the vertical and horizontal mount versions are suitable for mounting on through hole PCBs.
Standard Magnets
 |
We offer a range of magnets for customers using our products, in different sizes...Continue reading |
Actuation Distances for MO-1422 Reed Switches
 |
For easy selection of AT band and Magnet for an application, we offer Actuation...Continue reading |
Electrical
| Operate Range | AT | 15 – 50 |
| Release Range | AT | 5 – 35 |
| Contact Rating (max) | W/VA | 15.0 |
| Switching Current (max) | A | 0.5 |
| Carry Current (max) | A | 1.0 |
| DC Switching Voltage (max) | VDC | 150 |
| AC Switching Voltage (max) | VAC | 125 |
| Breakdown Voltage (min) | VDC | 200 |
| Contact Resistance (max) | mΩ | 150 |
| Insulation Resistance (min) | Ω | 1011 |
| Capacitance (min) | pF | 0.2 |
Miscellaneous
| Operate Time (max) | ms | 1.5 |
| Bounce Time (max) | ms | 0.8 |
| Release Time (max) | ms | 0.15 |
| Resonance Frequency | Hz | >2000 |
| Operating Frequency | Hz | 500 |
| Operating Temperature | °C | -40 to +200 |
| Shock Resistance (½Sin wave for 11ms) | G | 50 |
| Vibration Resistance (10-2000Hz) | G | 20 |
| Test Coil Code | 717 102 002 |
Ordering Code
| Formation Code | C | S | V | H |
| Cropped | SMD | Vertical Mount | Horizontal Mount |
MO-1422-(Operate AT Band)-(Formation Code)
Ordering Code Examples
MO-1422-15-20 denotes 10-15 Operate AT with unmodified leads
MO-1422-15-20-C denotes 10-15 Operate AT band with cropped leads
Handling of Reed Switches
 |
Reed Switch Handling Reed Switches are sensitive devices that easily develop micro cracks in...Continue reading |
Soldering Guide
 |
Manual Soldering of reed switch leads may be required when using custom plastic housing...Continue reading |
Ferro-magnetic parts
 |
Reed Switches use an alloy of Nickel and Iron with a few other elements...Continue reading |
Potting and Encapsulation
 |
Epoxy dispensing Nozzle When potting or encapsulating reed switch assemblies in custom housings, selection...Continue reading |
Reed Contact Protection Circuits
 |
It is assumed that the ideal reed switch load is a Resistive Load, but...Continue reading |
Magnet Information
 |
In general, there are four families of magnets available commercially. Factors such as operating...Continue reading |
Other Special Configurations Available
Lower Static Contact Resistance
Dynamic Contact Resistance Limit
Higher Insulation Resistance
Special Release Limits
Gold plated leads
Applications
Although we can never restrict the use of a reed switch to a particular field, the following is a list of some of the applications that the MO-1422 reed switch is known to perform well.
Float Switches in Portable Air Conditioners
 |
Portable Cooler Air Conditioners remove heat and moisture from an occupied space thereby improving...Continue reading |
Reed switches and Reed Sensors in Barcode Scanners
 |
Barcode scanners in supermarkets can be clicked on to a docking system that is...Continue reading |
Magnet sensors in Hospital Electric Beds
 |
Hospital Electric Bed Lets face it, no one likes to get into an accident...Continue reading |
Reed switches in Gear speed and direction sensing
 |
Gears Mechanical machinery always have a set of manual controls that not only direct...Continue reading |
Reed switches in Electronics and Science Kits
 |
Science Kit Reed Switches are used in many electronics and science kits for experimenting...Continue reading |
Reed sensors in weather proof electronics
 |
Smart phone using IP67 Housings The IP67 Code or the International Protection Marking states...Continue reading |