All dimensions in mm
♦ Does not require power for operation ♦ Normally Open contact ♦ Detect any ferro-magnetic material ♦ RoHS Compliant and Lead-free ♦ Not Sensitive to ESD ♦ Various types of leads and connectors available ♦
This screw mountable sensor can be mounted with M3 screws and can switch moderate loads of 10W. It can be actuated on the actuating side as shown below, by any Ferro-magnetic material that is longer than the length of the sensor. Unlike other standard Proximity Sensors, an actuating magnet is not require. All sensors are tested 100% for actuating distance before packing. Our products are completely Lead-free and conform to the RoHS directive.
This sensor is suitable for use in the following applications and in many others: industrial applications, end travel limit switch in pneumatic cylinders, position control, door and window security, cargo containers…
|Contact Rating (max)||W/VA||10.0|
|Switching Current (max)||A||0.5|
|Carry Current (max)||A||0.75|
|DC Switching Voltage (max)||VDC||100|
|Breakdown Voltage (min)||VDC||150|
|Contact Resistance (max)||mΩ||150|
|Operating Temperature||°C||-40 to +140|
|Shock Resistance (½Sin wave for 11ms)||G||30|
|Vibration Resistance (10-2000Hz)||G||20|
FM-328-(Cable Length in mm)-(Lead Type Code)
|Lead Type Code|
|S||Stripped to 5 mm|
|T||Stripped and Tinned|
Operate AT bands indicated above are for unmodified reed switch.
FM-328-500-S Denotes FM-328 proximity sensor with 500 mm cable length and Stripped to 5 mm.