Cylindrical M5 Threaded M8 Threaded Flat Pack Large Flat Pack Sensing Distances Crosslink Notes

Magnets
Test Coils
Lead Free

Protection
AT Band FAQ

Usage Notes

Reed Glossary

MS-225, M5 Threaded Cylindrical Proximity Sensor

Does not require power for operation

Omni-polar device; actuates with either pole of magnet

Normally open (NO) contact

Three magnetic sensitivity bands

RoHS Compliant and Lead-free

Various types of leads and connectors available

0.5 mm pitch threaded barrel for fine adjustment

Actuator magnet available in same housing

This threaded brass sensor is built for mounting in threaded holes as small as M5 and switch a 10W load. It is particularly useful in applications where distance adjustments need to be made every now and then. Various activating distances are available depending on the magnet and the AT band used. This sensor can be supplied with non-standard connectors on request. All sensors are tested 100% for operate and release AT, contact resistance and variable contact resistance before packing. Our products are completely Lead-free and conform to the RoHS directive.

MS-225 M5 threaded cylindrical Sensor

All dimensions in mm

Download this data sheet View actuation distances

Applications

This magnet sensor is suitable for use in the following applications and in many others: coil winder tension sensing, digital speedometers and tachometers, anemometers, pneumatic cylinders and actuators...

Specifications

Contact Form		A
Contact Rating (max)	W / VA	10.0
Switching Current (max)	A	0.5
Carry Current (max)	A	1.5
DC Switching Voltage (max)	V DC	180
Breakdown Voltage (min)	V DC	200
Initial Contact Resistance (max)	mΩ	150
Operating Temperature	°C	-40 to +70
Shock Resistance (½Sin wave for 11ms)	g	50
Vibration Resistance (10-2000Hz)	g	20

Ordering Code

MS-225-(Operate AT Code)-(Cable Length in mm)-(Lead Type Code)

OAT Code	OAT Band	Lead Type Code
1	10 - 15	S	Stripped to 5 mm
2	15 - 20	T	Stripped and Tinned
3	20 - 25	M	2-pin Female Molex Connector

Operate AT bands indicated above are for unmodified reed switch.

Example

MS-225-1-500-M

Denotes MS-225 proximity sensor in 10-15 Operate AT, with 500 mm cable length and Molex connectors.

Possible Magnet Actuations

Threaded Cylindrical Proximity Reed Sensor Actuation Examples

A few examples of magnet actuation are shown above. Cylindrical proximity sensors can be used in pneumatic cylinder end position sensing applications. Being an omnipolar device, this sensor can be actuated with either a north pole or a south pole or both. Choosing the right AT band, magnet strength, and operating axis, will restrict the number of operates and releases to one. Click here to view actuation distances of this sensor with the standard magnets.

Cylindrical M5 Threaded M8 Threaded Flat Pack Large Flat Pack Sensing Distances Crosslink Notes

Reed Relays and Electronics India Limited, 2008

Clicky